Model Number: SDS 100L~300L
Brand Name: Sidolim
Key Specifications/Special Features:
SpecificationsThe SiDoLim in situ sterilizable fermentor (SDS 100L~300L) system is a lab scale fermentor and designed for ease of use.Fermentor SDS 100L~300LThis system can be used for microbial, insect and mammalian cell culturing procedures. The stainless steel vessel and the whole attachments can be sterilized automatically or manually in the pilot scale fermentation system and the whole fermentation procedures can be also performed automatically. The integrated control board measures the whole sensor values and control the fermentor system based on the measured values. The procedures and monitored data are graphically displayed in the 8.5" color LCD screen and all the control parameters can be adjusted in the graphic mode.
Controller System
Head Lifting System
Controller System
- Very easy to connect with the various systems such as memory stick, printer, computer with the RS-232C communication protocol.
Head Lifting System
- Lifting speed can be adjusted by the modulation of the speed control valve.
- The pressure is controlled manually and/or automatically
- 220V 50/60Hz single phase, 380V 50/60Hz three phase
- pH, DO, Pressure, Temperature and Agitation speed
- The head lift system is powered by air cylinder and guided by two sets of linear motion guide. The lifting load capacity can be adjusted and designed for the size of the head plate.
Agitation | Drive | DC motor, AC Gear motor Top drive motor (mechanical drive) |
Range | 50~550 rpm 1 rpm | |
Sensor | Magnetic Hall sensor | |
Impellers | Turbine impeller(SUS 316L) Foam breaker(SUS 316L) | |
Control | Microprocessor based PID | |
Temperature | Range( ) | From 3 above the cooling water temperature to 80 (accuracy 0.1 ) |
Control | The temperature is automatically controlled by the built-in heater cartridge. | |
Sensor | RTD(Pt-100) | |
Aeration | Sparger | Ring sparger (SUS 316L) |
Inlet Filter | The cartridge type sterilizable pleated type 0.2μm absolute filter is applied. | |
Outer Filter | The same as inlet filter specification.(optional item) | |
Control Range | Different vessel size and/or ordered specifications. | |
Materials & Finish | Vessel | Using 316L stainless steel it is polished mechanically and/or electrically. |
Piping | 316L stainless steel prevents contamination and is polished by electrically. | |
O-rings / Gaskets | Viton or silicone material is used for the O-ring and the EPDM is used for the gasket. | |
Control Unit | Panel | 8.5" Graphic Color LCD, Membrane keypad |
Communications | Memory stick, printer, computer with the RS-232C communication protocol | |
Controller Board | Microprocessor based integrated controller board is adopted to measure, control and display the fermentation system |
Main Export Markets:
- Asia
- Australasia
- Central/South America
- Eastern Europe
- Mid East/Africa
- North America
- Western Europe